TPS79325YEQEVM

EVAL MODULE FOR TPS79325YEQ

About This Manual

This user’s guide describes the characteristics, operation, and use of the TPS793xxYEQEVM low drop-out (LDO) evaluation module (EVM).  This EVM features a TI LDO that offers ultra low noise performance with high PSRR, and 200mA load current capability all in the chip-scale package.  This user’s guide includes setup instructions, a schematic diagram, a bill of materials (BOM), and PCB layout drawings for the evaluation module.

Related Documentation From Texas Instruments

The following documents provide information regarding the TPS793xxYEQ EVM. These documents are available from the TI web site. The last charac ter of the literature number corresponds to the document revision, which is current at the time of the writing of this User’s Guide. Newer revisions may be available from the TI web site at http://www.ti.com/ or call the Texas In struments Literature Response Center at (800) 477−8924 or the Product Information Center at (972) 644−5580. When ordering, identify the item(s) by both title and literature number.

If You Need Assistance

If you have questions regarding either the use of this evaluation module or the information contained in this documentation, please contact your local TI sales representative.

FCC Warning

This equipment is intended for use in a laboratory test environment only. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to sub part J of part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equip ment in other environments may cause interference with radio communica tions, in which case the user at his own expense will be required to take whatever measures may be required to correct this interference.